Discontinuous WiFi connection can be a pain for those who are completely dependent on a fast and continuous internet connection to make their daily life tasks easier. But when we talk about Netgear extender setup such kind of issues are pretty normal.
With a multitude of WiFi-enabled devices, a stable and uninterrupted wireless connection is an important thing. If you are facing internet connectivity issues, then this post would be a lot helpful to you. In this demystify how-to tutorial, we will guide you step-by-step to get rid of this problem permanently.
Let’s have a look.
1. Placement of the existing wireless router
During Netgear new extender setup, don’t forget to place your exiting router at a central location near to your WiFi range extender. Also, both of them should be placed out of the reach of metal appliances, microwave, juicer, mixer grinder, treadmill, baby monitors, security alarms, automatic garage opener, dishwasher, thick walls, electronic gadgets and toys.
2. Distance between your existing router and the Netgear WiFi range extender
When you go with mywifiext Netgear setup process, must be plugged in within reach of each other. As a matter of fact, the optimum distance between them shouldn't exceed the limit of 20-25 meters. By doing this, you will be able to get fast and continuous internet speed in every nook and cranny corner of your house.
3. Non-WiFi devices
Wired and wireless devices that come with a radio transmitter can cause interference to your existing WiFi router. Make sure to place your router and the range extender away from interference creating devices. In case, it is impossible for you to do so, then consider turning your electronic devices off when not in use. This process will definitely help you get rid of discontinuous WiFi connection for sure.
4. Other wired and wireless devices on your home network
Slow and sluggish WiFi connection during the setup and installation of Netgear WiFi range extender can be caused by the number of connected networking devices. So, during the setup process of your WiFi range extender, you have to disconnect all the connected wired and wireless devices and connect only your computer or laptop so that you can access mywifiext and configure your range extender.
5. Interference of other WiFi devices
There may be some devices in your home that are not connected to your WiFi network but using radio frequency. These can be anything like Bluetooth devices, cordless phones, etc. In this case, changing of the channel or frequency band while Netgear wireless extender setup is a must.
6. Connection between range extender and the WiFi router
Make sure that during Netgear extender setup, you established a proper Ethernet connection between your range extender and the router. If not, then you can also use a WiFi connection to connect your devices with each other.
7. Check your Ethernet wire/cable
If you are using an Ethernet wire/cable to make a reliable connection between your router and the range extender, then make sure that it is in a good condition. What you have to do is to grab a well-maintained Ethernet cable and connect your devices with each other physically and properly.
Moreover, to make your extender up and up running always, make sure to perform Netgear firmware update timely.
So, these were some easy to execute tips that can help you avoid slow and sluggish WiFi connection issue. But if the issue still persists, follow the easy to understand steps below:
In the first place, make sure that you have established a proper connection between your router and the range extender. Also, check for their power supply.
Make sure that your client device is connected properly with the range extender.
Make sure that you are typing mywifiext.net URL correctly into the address bar of the web browser.
Mywifiext Netgear login page will appear. It will ask for default username and password. It is advised to type the correct login details carefully.
Once you are logged in successfully, check if your Netgear device is running the latest version of firmware or not. If not, consider updating the Netgear extender's firmware.
Use Netgear extender default IP if mywifiext not working.
If you are still unable to fix internet connectivity issues, then write to us at firstname.lastname@example.org or call at toll-free number 1-855-844-0144.
This section is really beneficial. I have the same issue walking tour paris . My WiFi connection breaks during the Netgear extender setup. I was browsing for a solution and found this page, I’m very thankful for your explanation. I hope that the steps provided here can help me to solve it.
Thanks for the info. Have you seen https://resumecvwriter.com/blog/cover-letter-template this page before? I want you to try it now.
Thanks for sharing this out here. If your modem and Orbi router have the same IP address then you will face orbi login not working error. If you are stuck anywhere, and need help any sort of help, give us a call to our professionals.
I totally agree with you guys. In case you are facing problem in accessing the netgear router login page via www.routerlogin.net web address, you can take instant help from our expert technicians.