Resolved: IP Address Conflict Error With Netgear Router

Are you struggling with IP address conflict error on your devices that are connected to Netgear router? If yes, you are likely not being able to connect to the internet. Chances are that the connection is unstable or you don't have the internet access on your device. Despite the fact that IP address error is very rare, it can make computers in a network utterly useless in the matter of network connectivity. However, this error is not going to trouble you anymore as we are here to fix the issue forever.

Netgear WiFi routers are well known for their ease of use and flexibility. These devices rank among the prominent router service providers at a reasonable price range. It comes with a default IP address i.e. But like any other electronic device, it hosts a wide range of issues such as Netgear router IP conflict error. This warning message generally appears when a user starts his computer. Even if the PC is in sleep mode, the error may arise.

What is an IP Address Conflict Error?

The error executes while users are turning on their PC or working in sleep mode when two PCs are on the same LAN network end up conflicting with the same IP. At that time, both of the PCs are not able to connect to the network resources and executing other network operations.

Let's have a look at the basic reasons behind this issue:

  • Two PCs are using the same static IP addresses.

  • One PC makes use of a static IP address which falls into the DHCP range for the local network and the same address is provided to a computer used by the DHCP server.

  • In case you have connected multiple WiFi routers to your network and more than one device has DHCP enabled on them.

  • In the case of multiple network adapters, it is feasible for a computer to have an IP address conflict with itself.

  • A laptop is in the sleep mode and then enabled while connecting to another network which has already the same IP as that of another PC.

Without further ado, let's provide you with the solutions to fix this frustrating issue.

Fixed: IP Address Conflict Error

As mentioned above, the error generally appears when multiple devices are connected to a single LAN (Local Area Network). As a result, two network conflict with the single IP address. In this way, the devices can't connect to network resources and prevent you from accessing any web page like

Such errors require implicit solutions to resolve critical issues from the roots. Here is a list of the possible solutions to help you out.

Restart the Wireless Router

Sometimes, a simple restart can fix the things. Restarting will help you detect and resolve the malfunction in addition to assist you to rectify the IP conflict error. For this, unplug the router from the power socket and turn it off completely. Wait for a few seconds and plug in the router back to an electrical outlet. Once done, turn it on.

Renew the IP Address

It is quite a common solution that can help you in chucking out the error by renewing the IP address. All you need to do is simply write the 'CMD' command in the Run box and check if your system is showing any significant change as a result of it. Now, you can run the command to renew your computer IP address by making the DHCP server available. You can opt for Netgear router support if you come across any sort of issue while renewing your system IP address.